INTOUCH OPC LINK DOWNLOAD INSTALL

INTOUCH OPC LINK DOWNLOAD INSTALL

To figure out if this has something to do with a Wonderware setting simply install a free opc client like Kepware has integrated in kepserverex. Tested Uniopc also in combination with scada system Control Maestro added a tag referencing SI30 (RTC current second) and it updates within 2 seconds. I have tried something with the time intervals in UniOPC and Intouch but the result was the same.

So, I'm not sure where to look for the problem, is it Intouch or UniOPC, or OPCLink. So, I see that MB10 has been written to item MB10 (Success), but I can't see any info about MB29. Also in UniOPC Server Event Log, I can see only the items that are going from the PC to the PLC, but not other way around. The motor starts, and as an information I should receive MB29 from the PLC that the motor started, but this variable i'm getting it after 3,4 second, sometimes more.Дў. I hit MB10 from PC as a command to start the motor. The time for refreshment is too long (ex.

When I set a command from the PC to the PLC, there is no problems so far, but when I should receive an information from the PLC to the PC, I have problems.

I have successfully made the communication part between the PLC (Unitronics) and the PC (Intouch), it is communicating, but I still have problems:ДЎ. I'm finishing a project that includes Unitronics PLC V130-33-T38 and Wonderware Intouch Scada.

Intouch opc link download